XPTC Tray Cable #12-2 AWG With and Without Ground XHHW/PVC

Scope:

Stranded copper conductors (ASTM B-8), crosslinked polyethylene (type XHHW-2) insulated for moisture and heat resistance. Phase identified and cabled together with fillers and/or binders as required. Optional bare copper or insulated green ground cable is included as well. Cabled core is covered with an overall black PVC jacket that is gas and oil resistant. Jacket available in colors. Suitable for use in hazardous locations: Class 1 and 2, Division 2.

Applicable Standards and Tests:

• UL 1277 at 600 volts
• Flame Rated: IEEE 1202 (70,000 BTU)
• ICEA S-95-658/NEMA WC-70
• Temperature Rated at 90°C Wet/Dry
• -25°C Rated
• VW-1 Rated Conductors
• Direct Burial & Sunlight Resistant
• Exposed Runs Rated (TC-ER)
• Color Code: NEMA WC 57/ICEA S-73-532 Table E-1, E-2, or M4

Construction:

Conductors:

Concentric 19 strand soft drawn annealed copper per UL and ASTM requirements. Tinned conductors and other stranded configurations are available upon request. Single conductors are Oil & Gas Resistant I.

Insulation:

Crosslinked polyethylene (XLP) is VW-1 rated and Oil and Gasoline Resistant I. All black insulation is rated “Sunlight Resistant”.

Ground Conductor:

Bare copper conductor or insulated green crosslinked polyethylene (XLP) is Oil and Gasoline Resistant I.

Jacket:

A black, flame resistant, Polyvinyl Chloride (PVC) jacket is extruded over the assembly. The surface profile shall approximate that of the interior assembly.

Identification and Packaging:

The wire shall be identified by surface marking indicating the manufacturer, conductor size, voltage rating, UL symbol, and type designation. Custom lengths, color, and packaging is available by request.

Applicable Standards and Tests:

Kris-Tech Wire XX AWG XX conductor E515926 (UL) TC-ER XHHW-2 600V 90°c wet/dry pvc jacket sun res FT4 “RoHS” made in USA